Filters Category, zone, brand

70 parts

  • EC-CBC-06

    Controller Board — I/O Module

    Replacement I/O controller board for injection molding machine electrical cabinet.

    Controller BoardsIn stock
  • EC-CBC-12

    Controller Board — Main CPU Board

    Main CPU controller board for injection molding machine control system.

    Controller BoardsIn stock
  • EC-CBC-13

    Controller Board — Drive Interface

    Drive interface controller board for injection molding machine servo/inverter systems.

    Controller BoardsIn stock
  • EC-CBC-14

    Controller Board — Power Supply Board

    Power supply board for injection molding machine electrical cabinet.

    Controller BoardsIn stock
  • EC-CE-01

    Electrolytic Capacitor

    High-capacity electrolytic capacitor for injection molding machine servo drives and inverters.

    Capacitors & ElectronicsIn stock
  • EC-CE-02

    Film Capacitor / Filter Capacitor

    Film capacitor for injection molding machine drive filtering and power conditioning.

    Capacitors & ElectronicsIn stock
  • EC-GEP-01

    AC Servo Motor

    High-performance AC servo motor for energy-saving injection molding machine hydraulic systems.

    Servo Motors & DrivesIn stock
  • EC-HT-01

    Ceramic Heater Band

    Full-enclosed ceramic heater band for injection molding machine barrel and nozzle heating zones.

    HeatersIn stock
  • EC-HT-02

    Thermocouple Sensor

    Precision thermocouple temperature sensor for injection molding machine barrel temperature measurement.

    HeatersIn stock
  • EC-SF-01

    Safety Switch / Limit Switch

    Safety and limit switch for injection molding machine guard door and travel detection.

    Safety & SwitchesIn stock
  • EC-SF-03

    Proximity Sensor / Position Sensor

    Inductive proximity sensor for injection molding machine position detection.

    Safety & SwitchesIn stock
  • HY-AU-02

    Hydraulic Accumulator

    Bladder-type hydraulic accumulator for injection molding machine high-speed injection circuits.

    AccumulatorsIn stock
  • HY-CV-02

    Directional Control Valve

    Solenoid-operated directional control valve for injection molding machine hydraulic circuits.

    Control ValvesIn stock
  • HY-CV-04

    Proportional Pressure/Flow Valve

    Proportional solenoid valve for precise pressure and flow control in injection molding machines.

    Control ValvesIn stock
  • HY-CV-05

    Check Valve

    Hydraulic check valve for injection molding machine circuits.

    Control ValvesIn stock
  • HY-CV-06

    Relief Valve / Safety Valve

    Hydraulic relief and safety valve for injection molding machine system pressure protection.

    Control ValvesIn stock
  • HY-CV-08

    Cartridge Valve

    Hydraulic cartridge valve for injection molding machine manifold blocks.

    Control ValvesIn stock
  • HY-CV-15

    Solenoid Operated Valve — High Flow

    High-flow solenoid operated directional valve for large-tonnage injection molding machines.

    Control ValvesIn stock
  • HY-MO-01

    Hydraulic Pressure Gauge

    Glycerin-filled hydraulic pressure gauge for injection molding machine system monitoring.

    Monitoring & InstrumentsIn stock
  • HY-PW-02

    Gear Pump (Sumitomo QT32)

    Sumitomo QT32 series internal gear pump for injection molding machine hydraulic systems.

    Pumps & MotorsIn stock
  • HY-PW-03

    Hydraulic Power Unit / Oil Pump Assembly

    Complete hydraulic pump motor assembly for injection molding machine power unit.

    Pumps & MotorsIn stock
  • HY-PW-05

    Pump Coupling & Bell Housing

    Pump coupling and bell housing adapter for injection molding machine hydraulic pump drives.

    Pumps & MotorsIn stock
  • HY-PW-06

    Hydraulic Vane Pump

    High-performance hydraulic vane pump for injection molding machine hydraulic power units.

    Pumps & MotorsIn stock
  • HY-PW-07

    Hydraulic Piston Pump

    Variable displacement hydraulic piston pump for high-pressure injection molding machine applications.

    Pumps & MotorsIn stock
  • HY-PW-08

    Hydraulic Plasticizing Motor (NHM Series)

    NHM series radial piston hydraulic motor for injection molding machine screw pre-plasticizing drive.

    Pumps & MotorsIn stock
  • MC-BC-01

    Bimetallic Barrel & Screw Assembly

    High-quality bimetallic barrel and screw assembly for plastic injection molding machines.

    Barrels & CylindersIn stock
  • MC-BC-02

    Injection Screw

    Replacement injection screw for injection molding machine plasticizing unit.

    Barrels & CylindersIn stock
  • MC-BC-06

    Injection Cylinder

    Injection hydraulic cylinder for injection molding machine injection unit.

    Barrels & CylindersIn stock
  • MC-BC-07

    Injection Nozzle

    Precision-machined injection nozzle for plastic injection molding machines.

    Barrels & CylindersIn stock
  • MC-BC-08

    Barrel Front Flange (Front Head)

    Barrel front flange (front head) for Haitian MA series injection molding machines.

    Barrels & CylindersIn stock
  • MC-CC-01

    Clamping Cylinder

    Main clamping (mold locking) hydraulic cylinder for injection molding machine clamping unit.

    Clamping CylindersIn stock
  • MC-CC-02

    Clamping Cylinder — Small / Auxiliary

    Auxiliary clamping or ejection cylinder for injection molding machine.

    Clamping CylindersIn stock
  • MC-CR-02

    Toggle Link / Crosshead

    Toggle clamping system link and crosshead for injection molding machine clamping unit.

    Clamping MechanismIn stock
  • MC-ES-08

    Ejector Rod

    Machine ejector rod for injection molding machine ejector system.

    Ejector SystemIn stock
  • MC-ES-09

    Ejector Connecting Plate & Pin Kit

    Ejector assembly connecting plate and pin kit for Haitian injection molding machines.

    Ejector SystemIn stock
  • MC-GMP-01

    Screw Head Wrench (3-Prong / 4-Prong / 6-Prong)

    Specialist screw head wrench for removing injection molding machine screw heads.

    Maintenance ToolsIn stock
  • MC-GMP-02

    Barrel Heating Band Removal Tool

    Specialized tool for removing and installing heater bands on injection molding machine barrels.

    Maintenance ToolsIn stock
  • MC-GZ-01

    Injection Piston Rod

    Injection unit piston rod for injection molding machine injection cylinder.

    Shafts & RodsIn stock
  • MC-GZ-02

    Guide Column Nut (Type 2)

    Guide column lock nut for injection molding machine clamping unit guide columns.

    Nuts & FastenersIn stock
  • MC-GZ-03

    Guide Column Nut (Type 3)

    Guide column flanged nut for injection molding machine clamping unit.

    Nuts & FastenersIn stock
  • MC-GZ-04

    Locking Nut / Jam Nut

    Locking jam nut for injection molding machine guide columns and shafts.

    Nuts & FastenersIn stock
  • MC-GZ-5

    Guide Column Bushing (Small)

    Small guide column bronze bushing for injection molding machine clamping unit.

    Bushings & BearingsIn stock
  • MC-GZ-6

    Guide Column Bushing (Medium)

    Medium guide column bronze bushing for injection molding machine clamping unit.

    Bushings & BearingsIn stock
  • MC-GZ-07

    Guide Shaft / Connecting Link

    Guide shaft or connecting link for injection molding machine clamping system.

    Shafts & RodsIn stock
  • MC-GZ-10

    Guide Column Bushing (Large)

    Large guide column bronze bushing for injection molding machine clamping unit.

    Bushings & BearingsIn stock
  • MC-JM-02

    Toggle Pin Bushing

    Toggle pin bronze bushing for injection molding machine clamping toggle system.

    Bushings & BearingsIn stock
  • MC-JM-04

    Mold Clamping Plate / Locating Ring

    Mold clamping plate and locating ring for injection molding machine platens.

    Mold InterfaceIn stock
  • MC-JM-05

    Toggle Link Connecting Rod Bushing

    Toggle link connecting rod bushing for injection molding machine clamping mechanism.

    Bushings & BearingsIn stock
  • MC-PP-01

    Machine Platen (Movable / Stationary)

    Stationary or movable platen for injection molding machine clamping unit.

    PlatensIn stock
  • MC-SB-01

    Screw Barrel Assembly

    Complete screw and barrel assembly for injection molding machine plasticizing unit.

    Seals & BearingsIn stock
  • MC-SB-07

    Piston Rod Seal Set

    Piston rod seal set for injection molding machine hydraulic cylinders.

    Seals & BearingsIn stock
  • MC-SB-08

    Hydraulic Cylinder Seals & Y-Ring

    Hydraulic cylinder seal kits and Y-ring piston rod seals for injection molding machine cylinders.

    Seals & BearingsIn stock
  • MC-SB-10

    Piston Rod Nut

    Injection cylinder piston rod nut for Haitian and equivalent injection molding machines.

    Cylinders & SealsIn stock
  • MC-SG-08

    Linear Guide Rail & Slider

    Linear guide rail and slider block for injection molding machine injection unit or carriage.

    Guides & SlidesIn stock
  • MC-SR-05

    Return Spring / Ejector Spring

    Return spring and ejector spring for injection molding machine ejector and toggle systems.

    Springs & SupportsIn stock
  • MC-TC-01

    Tie Bar

    High-strength tie bar for injection molding machine clamping unit.

    Tie Bars & ColumnsIn stock
  • MC-TC-03

    Tie Bar Liner Bushing

    Tie bar liner bushing for injection molding machine platen tie bar bores.

    Tie Bars & ColumnsIn stock
  • MC-TC-06

    Tie Bar Nut

    Tie bar nut (split nut) for injection molding machine clamping unit.

    Tie Bars & ColumnsIn stock
  • MC-TC-07

    Tie Bar Bushing

    Tie bar bronze bushing for injection molding machine platen guide bearings.

    Tie Bars & ColumnsIn stock
  • MC-TC-09

    Tie Bar Adjustment Bushing

    Tie bar adjustment bushing for injection molding machine clamping force adjustment.

    Tie Bars & ColumnsIn stock
  • MC-TC-13

    Tie Bar End Cap / Lock Ring

    Tie bar end cap and lock ring for injection molding machine clamping unit.

    Tie Bars & ColumnsIn stock
  • MC-TC-0102

    Tie Bar Set (Pair)

    Matched pair of tie bars for injection molding machine clamping unit.

    Tie Bars & ColumnsIn stock
  • MC-TL-01

    Machine Leveling Foot Bolt

    Adjustable leveling foot bolt for injection molding machine installation.

    Machine Tools & AccessoriesIn stock
  • MC-TL-02

    Toggle Arm / Link Rod

    Toggle arm and link rod for injection molding machine five-point toggle clamping unit.

    Toggle & ClampingIn stock
  • MC-TL-03

    Toggle Pin / Hinge Pin

    Toggle hinge pin for injection molding machine toggle clamping mechanism.

    Pins & ShaftsIn stock
  • MC-TL-05

    Toggle Link Bushing

    Toggle link bronze bushing for injection molding machine toggle clamping mechanism.

    Bushings & BearingsIn stock
  • MC-TL-07

    Anti-Vibration Foot Pad

    Anti-vibration rubber foot pad for injection molding machine floor mounts.

    Machine Tools & AccessoriesIn stock
  • O-TC-02

    Hydraulic Oil Filter

    Self-sealing magnetic suction oil filter for injection molding machine hydraulic tanks.

    Filters & CoolingIn stock
  • O-TC-04

    Oil Cooler / Heat Exchanger

    Hydraulic oil cooler (heat exchanger) for injection molding machine oil temperature control.

    Filters & CoolingIn stock
  • O-TC-05

    Oil Tank / Hydraulic Reservoir

    Hydraulic oil reservoir tank for injection molding machine power unit.

    Filters & CoolingIn stock

Haitian parts by machine zone

Where each part sits on the machine. Each zone has a guide to its parts, how they wear and what to send for a quote.

Haitian International machine series

  • Mars Series (MA)

    servo hydraulic · toggle clamp · 60–3300 t

    Mars Series - 5th Generation Servo Hydraulic Toggle Injection Molding Machine. The MA5 is the intelligent standard in economically energy-saving injection molding.

    Models: MA600MA900MA1200MA1600MA2000MA2500MA3200MA3800MA4500MA5300MA6000MA6800MA7500MA8800MA10000MA12000MA14000MA16000MA19000MA22000MA25000MA28000MA33000

    68 catalog parts are listed for this series.

  • Jupiter Series (JU)

    servo hydraulic · two platen clamp · 450–8800 t

    Jupiter Series - 5th Generation Servo Hydraulic Two-Platen Injection Molding Machine. Compact, versatile, and ideal for large items to high-precision parts.

    Models: JU4500JU5500JU6500JU7500JU8800JU10800JU13000JU16000JU19000JU22000JU27000JU33000JU40000JU50000JU60000JU72000JU88000

    19 catalog parts are listed for this series.

  • Zhafir Venus Series (VE)

    all electric · toggle clamp · 40–1380 t

    Zhafir Venus Series - Fully Electric Injection Molding Machine. Precise, clean, and energy efficient for high-precision applications.

    Models: VE400VE600VE800VE1000VE1200VE1600VE2000VE2300VE2800VE3300VE3800VE4500VE5500VE6800VE8800VE10800VE13800

    Parts for this series are sourced on request.

  • Zhafir Zeres Series (ZE)

    hybrid electric · toggle clamp · 40–1380 t

    Zhafir Zeres Series - Electric with Integrated Hydraulics. Combines the precision of electric drives with the flexibility of hydraulic core functions.

    Models: ZE400ZE600ZE800ZE1000ZE1200ZE1600ZE2000ZE2300ZE2800ZE3300ZE3800ZE4500ZE5500ZE6800ZE8800ZE10800ZE13800

    Parts for this series are sourced on request.

  • Zhafir Jeres Series (JE)

    hybrid electric · two platen clamp · 350–3300 t

    Zhafir Jeres Series - Hybrid Two-Platen Electric Injection Molding Machine. Combines electric precision with two-platen space efficiency for large parts.

    Models: JE3500JE4500JE5500JE6500JE7500JE8800JE10800JE13000JE16000JE19000JE22000JE27000JE33000

    Parts for this series are sourced on request.

Component brands and series we replace

Hydraulic and electrical components on Haitian machines carry their maker's model code on a nameplate. These parts are matched by that code.

PartReplaces
AC Servo Motor EC-GEP-01Hysis U31, U1
Hydraulic Pressure Gauge HY-MO-01Tecsis
Gear Pump (Sumitomo QT32) HY-PW-02Sumitomo
Hydraulic Vane Pump HY-PW-06Vickers 20V, 25V, 35V, 45V; Tokimec / SQP; Vickers / Eaton VQ; YUKEN PV2R; Taixin PV2R; 50T
Hydraulic Piston Pump HY-PW-07YUKEN A, ARL1
Hydraulic Plasticizing Motor (NHM Series) HY-PW-08NHM1, NHM2, NHM3, NHM6, NHM8, NHM11, NHM16, NHM31

Questions about Haitian parts

Which Haitian machines do your parts fit?

Catalog parts are listed for the Mars Series (MA) (68 parts) and Jupiter Series (JU) (19 parts). Each part page lists the exact machine series it fits; parts for other Haitian series are sourced on request.

How do I find the right part for my Haitian machine?

Send the machine model and serial number from its nameplate, the part number from the machine's parts list if you have it, and photos of the old part with its main dimensions. Pumps, valves, motors and sensors also carry their own maker's model code, which identifies them exactly.

Can you supply Haitian parts that are not in the catalog?

Yes. The catalog lists the parts we supply most often; other parts are sourced to the part number, a drawing or a sample. Send the details through the quote request page, by email or on WhatsApp.

Sourcing

Can't find your part?

Most of what we supply is not listed online. Send the machine model with a photo or a short description, and we find the part for you.

Phone, WhatsApp and WeChat
+86 177 5743 2656
Chat on WhatsApp(opens in a new tab)