Mechanical Components
End Caps & Plates
End caps, connecting plates, and mounting hardware
Parts of the ejector
Point at a number or a part of the drawing.
Small hydraulic cylinder mounted behind the moving platen. It pushes the ejector plate forward to free the part, then pulls it back.
Plate that joins the cylinder rod to the ejector rods so they all move together. Guide pins through it keep it square.
Springs on the guide pins that push the plate back after ejection, so the ejector rods are clear before the mold closes.
The ejector rods pass through holes in the moving platen to reach the mold.
Hardened rods that carry the ejector force through the platen to the mold’s ejector plate.
Part of the mold, not the machine: the plate carries the pins that push the molded part off the core.
Filters Category, zone, brand
- Ejector SystemIn stock
- MC-ES-09Ejector SystemIn stock
Ejector Connecting Plate & Pin Kit
Ejector assembly connecting plate and pin kit for Haitian injection molding machines.
How these parts work
How each part works, how it wears and what to send for a replacement quote, with drawings.
- Machine zone guideEjector system of an injection molding machineHow the ejector of an injection molding (moulding) machine pushes parts off the mold: ejector cylinder, connecting plate, rods, return springs, settings and faults.
- Ejector rodsWhat the ejector rods of an injection molding machine do, coupled and uncoupled rods, how to set rod length for a mold, signs of bent or loose rods, and replacement.
- Ejector plateThe two ejector plates in injection molding: the machine's connecting plate behind the moving platen and the mold's ejector plate, how they work together and wear.
Sourcing
Can't find your part?
Most of what we supply is not listed online. Send the machine model with a photo or a short description, and we find the part for you.
- contact@
imspares.com - Phone, WhatsApp and WeChat
- +86 177 5743 2656